Advertisement
Using your window vacuum
Insert the charger cable into
the power charger connector.
Plug the charger into the mains.
Power charger indicator light will
flash during charging, when fully
charged the indicator light will
show solid red. The Spray & Vac
will need to charge for 2 hours
Top up with water (Max 35�C)
to MAX line on solution side of
the dual tank and turn the cap
clockwise to close
Note: You may need to press the trigger a few times first before solution is dispensed, this clears air from the system
Turn the Spray & Vac
on using the power
on/off button
Squeeze the tank release
buttons to remove the tank
from the window vacuum
To attach the dual tank back
onto the unit, insert top first
and gently push the bottom
until it fastens into place
Vacuum up the water using
slow, straight strokes
Using your machine
Turn the lid of the
cleaning solution tube
anticlockwise and lift
to remove
Pull the trigger to spray
solution onto the surface
to be cleaned
When you reach the bottom of
the window, apply pressure and
the suction head will pivot
120ml
80ml
40ml
Pour 40ml of Vax window
solution into the cleaning
solution side of the dual
tank, using the funnel
Wipe/scrub the surface
with the microfibre or
scrub pad on the
suction head
Hide quick links:
Advertisement
