Using The Mouse - ROHS SV-HVR2800 series User Manual

6. DIRECTION/ENTER Buttons: For navigating around menus when you' e not using
the mouse.
7. IR Receiver: Receiver for IR remote.
8. POWER: POWER indicator turn on when DVR is power on.
9. HDD LED: Will flash whenever the DVR is writing to/reading from the installed hard
drive.

Using the Mouse

A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this
DVR.
To use a USB mouse:
1. Plug USB mouse into one of the USB ports on the front panel of the DVR.
2. The mouse should automatically be detected. If in a rare case that the mouse is
not detected, please refer to the recommended device list from your provider.
The buttons on the mouse corresponds to:
1. Left Button:

Single-Click: Select a component of a menu, such
as a button or an input field. This is similar to
pressing the ENTER button on the remote/front
panel controls.

Double-Click: Switch between single screen and
multi-screen mode in Preview/ Playback mode.

Click and Drag: Clicking and dragging the Left
mouse button can be used to control the digital
zoom area. It can also be used to setup the alarm
areas.
2. Right Button:

Single-Click: Shows pop-up menu.
3. Scroll-Wheel:

Scroll Up: In Menu mode, it will move the selection
to the previous item.

Scroll Down: In Menu mode, it will move the
selection to the next item.
SV-HVR2800 Series DVR User Manual
7