Advertisement
1. Connect the TV to the power supply.
2. To turn the TV on, press the
3. To turn the TV off, press the
Press
on the remote or TV set to display the input source menu.
Use the CH+/- buttons on the TV set or the
to select the input source, then press the OK button on the remote
control to select it.
: Before selecting the input source, make sure the connections are
prepared and the input source is powered up.
Press the MENU button to display the OSD menu as shown below:
▲ ▼
Use the / buttons to select the main menu, then press /
submenu. In the submenu, use the / buttons to select the function item, then
press / ▶
to enter the setup menu.
◀ ▶
Press / the buttons to adjust, or press / to select and press / /
confirm.
Press / ◀
•
Press
•
Notes:
The relevant input sources can only be accessed when the suitable input
•
signal is active.
For hints on the operation of the OSD menu, refer to the hints displayed at
•
the bottom of the screen.
to return to the previous menu.
to exit the display menu.
button on the TV or remote control.
button on the TV or remote control.
▲ ▼
buttons on the remote
▲ ▼
▲ ▼
▶
to enter the
◀ ▶
to
9
Advertisement
