Electrical Parts List - Sanyo PLV-Z3000 Service Manual

Electrical Parts List

Product safety should be considered when a component replacement is made in any area of a projector.
Components indicated by a
significance to product safety. It is particularly recommended that only parts specified on the following parts list be used for
components replacement pointed out by the mark.
● Read Description in the parts list
Read description in the Capacitor and Resistor as follows:
CAPACITOR
CERAMIC 100P K 50V
Material:
CERAMIC........... Ceramic
MT-PAPER......... Metallized Paper
POLYESTER...... Polyester
MT-POLYEST.....Metallized Polyester
POLYPRO.......... Polypropylene
MT-POLYPRO....Metallized Polypropylene
COMPO FILM.....Composite film
MT-COMPO........Metallized Composite
STYRENE...........Styrene
TA-SOLID........... Tantalum Oxide Solid Electrolytic
AL-SOLID........... Aluminium Solid Electrolytic
ELECT................ Aluminum Foil Electrolytic
NP-ELECT..........Non-polarised Electrolytic
OS-SOLID.......... Aluminium Solid with Organic Semiconductive Electrolytic
POS-SOLID........ Polymerized Organic Semiconductive
DL-ELECT.......... Double Layered Electrolytic
PPS-FILM...........Polyphenylene Sulfide Film
MT-PPS-FILM.....Metalized Polyphenylene Sulfide Film
MT-PEN-FILM.....Metalized Polyethylenenaphthalate Film
CAPACITOR.......Other
RESISTOR CARBON
Material:
CARBON........... Carbon
MT-FILM............ Metal Film
OXIDE-MT......... Oxide Metal Film
SOLID................ Composition
MT-GLAZE......... Metal Glaze
WIRE WOUND... Wire Wound
CERAMIC RES.. Ceramic
FUSIBLE RES....Fusible
RESISTOR ........Other
! mark in this parts list and the circuit diagram show components whose value have special
Tolerance Symbols:
Less than 10pF
A : Not specified B : ±0.1pF
D : ±0.5pF
G : ±2pF
R : ±0.25 -0pF
More than 10pF
A : Not specified B : ±0.1%
D : ±0.5%
H : ±3%
L : ±15%
P : +100-0%
U : +75-10%
X : +40-20%
Rated value: P=pico farad, U=micro farad
4.7K J A 1/4W
Performance Symbols:
A: General B: Non flammable Z: Low noise
Other: Temperature coefficient
T: ±10ppm/ϒ C
D: ±100ppm/ϒ C
G: ±350ppm/ϒ C
Y: ±1400ppm/ϒ C±10% J: ±2000ppm/ϒ C±10% K: ±2400ppm/ϒ C±10%
L: ±2700ppm/ϒ C±10% M: ±3000ppm/ϒ C±10% N: ±3300ppm/ϒ C±10%
P: ±3600ppm/ϒ C±10% Q: ±3900ppm/ϒ C±10% R: ±4200ppm/ϒ C±10%
S: ±4300ppm/ϒ C±10% V: ±4500ppm/ϒ C±10% X: ±8000ppm/ϒ C±10%
Tolerance Symbols:
A: ±0.05% B: ±0.1% C: ±0.25% D: ±0.5%
F: ±1% G: ±2%
M: ±20% P: +5-15% Z: 0 ohm
Rated value, ohms:
K: 1,000, M: 1,000,000
Rated Voltage
C : ±0.25pF
E : +0 -1pF F : ±1PF
H : +0.1 -0pF L : +0 -0.1pF
S : +0-0.25pF
C : ±0.25%
F : ±1% G : ±2%
J : ±5% K : ±10%
M : ±20% N : ±30%
Q : +30-10% T : +50-10%
V : +20-10% W : +100-10%
Y : +150-10% Z : +80-20%
Rated Wattage
U: ±25ppm/ϒ C
E: ±200ppm/ϒ C
H: ±1000ppm/ϒ C±10% W: ±1200ppm/ϒ C±10%
J: ±5% K: ±10%
- 92 -
C: ±50ppm/ϒ C
F: ±250ppm/ϒ C