Pioneer VSX-1015-S Service Manual page 137

5
6 (TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your surround sound
system. Also used to control DVD menus/options and for deck
1 of a double cassette deck player. Use the TUNE +/– buttons
to find radio frequencies and use ST +/– to find preset stations.
7 TV CONTROL buttons
These buttons are dedicated to control the TV assigned to the
TV CONT button. Thus if you only have one TV to hook up to this
system assign it to the TV CONT MULTI CONTROL button. If
you have two TVs, assign the main TV to the TV CONT button.
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
8 Component control buttons
The main buttons ( , , etc.) are used to control a component
after you have selected it using the MULTI CONTROL buttons.
The controls above these buttons can be accessed after you
have selected the corresponding MULTI CONTROL button
(for example DVD/LD, DVR/VCR or TV/SAT).
TUNER DISPLAY
Switches between named station presets, radio
frequencies and RDS information.
MPX
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to mono
will improve the sound quality.
AUDIO
Changes the audio language or channel on DVD discs.
CH RETURN
Returns to the last channel selected with SAT and some
TVs.
SUBTITLE
Displays/changes the subtitles included in multilingual
DVD-Video discs.
CH +/–
Use to select channels when using a TV, VCR, DVR, etc.
The following DVR controls can be accessed by pressing
SHIFT:
REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard disk and DVD
controls for DVD/HDD recorders.
5
6
9 RECEIVER CONTROL buttons
THX
Press to select a Home THX listening mode.
STANDARD
Press for Standard decoding and to switch between the
various Pro Logic IIx and Neo:6 options.
ADV. SURR
Use to switch between the various surround modes.
STEREO
Switches between direct and stereo playback. Direct
playback bypasses the tone controls and any other signal
processing for the most accurate reproduction of a source.
AUTO SURR
Press to have the receiver automatically detect what kind of
source you're playing and select multichannel or stereo
playback as necessary.
ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting.
SIGNAL SELECT
Use to select an input signal.
MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at low
volume. Use Loudness to boost the bass and treble at low
volume.
EFFECT/CH SEL
Press repeatedly to select a channel, then use –/+ to adjust
the level. Also adjusts the level of the Advanced Surround
effects as well as Dolby Pro Logic IIx Music and Neo:6
Music parameters. You can then use the + and – buttons
to make these adjustments.
+/–
Use to adjust the effect and channel levels, as well as to
change Dolby Pro Logic IIx and Neo:6 Music parameter
settings.
SLEEP (SHIFT & –)
Use to put the receiver in sleep mode and select the
amount of time before the receiver turns off.
DIALOG E (SHIFT & +)
Use to make dialog stand out when watching TV or
a movie.
10 SHIFT
Press to access the DVR controls (above the component control
buttons) as well as some RECEIVER controls.
11 SOURCE
Press to turn on/off other components connected to the
receiver.
VSX-1015-K
6
7
7
8
A
B
C
D
E
F
137
8