Pioneer VSX-1015-S Service Manual page 138

1
12 Character display (LCD)
This display shows information when transmitting control
signals.
The following commands are shown when you're setting the
remote to control other components :
A
SETUP
Indicates the setup mode, from which you choose the
options below.
PRESET
LEARN
DIRECT F
ERASE
B
RESET
READ ID
13 RECEIVER
Switches the remote to control the receiver (used to select the
green commands above the number buttons (INPUT ATT, etc)).
Also use this button to set up surround sound.
14 VOL +/–
Use to set the listening volume.
C
15 MUTE
Mutes the sound or restores the sound if it has been muted
(adjusting the volume also restores the sound).
D
E
F
138
1
2
Operating range of remote control unit
The remote control may not work properly if:
• There are obstacles between the remote control and the
receiver's remote sensor.
• Direct sunlight or fluorescent light is shining onto the remote
sensor.
• The receiver is located near a device that is emitting
infrared rays.
• The receiver is operated simultaneously with another
infrared remote control unit.
VSX-1015-K
2
3
30
30
7m
3
4
4