Download Print this page

V2GO GO-852 Manual

2.4ghz digital wireless microphone w/ adaptive frequency hopping technology

Advertisement

Quick Links

Dyna-Mic.01
2.4GHz Digital Wireless Microphone
2.4GHz Digital Wireless Microphone
w / A d a p t i v e F r e q u e n c y H o p p i n g Te c h n o l o g y
Your new V2GO Dyna-Mic.01 is
Your new V2GO Dyna-Mic.01 is
wireless microphone system available. Th
wireless microphone system available. Th
designed using 2.4GHz Adaptive Frequency Hopping Technology (AFHT),
designed using 2.4GHz Adaptive Frequency Hopping Technology (AFHT),
the leading digital wireless transmission solution in the world.
the leading digital wireless transmission solution in the world.
This technology goes beyond the inherent restriction of traditional FM, VHF
This technology goes beyond the inherent restriction of traditional FM, VHF
or UHF wireless microphone systems such as narrow frequency response
or UHF wireless microphone systems such as narrow frequency response
and weak interference rejection, while still completely covering the full audio
and weak interference rejection, while still completely covering the full audio
spectrum (20Hz to 20KHz). AFHT offers the advantages of extraordinarily
spectrum (20Hz to 20KHz). AFHT offers the advantages of extraordinarily
strong interference rejection, the lowest power consumption of any wireless
strong interference rejection, the lowest power consumption of any wireless
microphone system available and easy installation and operation. The AFHT
microphone system available and easy installation and operation. The AFHT
design is creating a revolution in wireless systems, led by V2GO
design is creating a revolution in wireless systems, led by V2GO
Technologies, Inc.
Technologies, Inc.
The Dyna-Mic.01 wireless microphone system is able to deliver superior
The Dyna-Mic.01 wireless microphone system is able to deliver superior
wireless vocal or music transmission without distortion or overload. It has
wireless vocal or music transmission without distortion or overload. It has
been designed for use in indoor spaces up to 8,000 sq.ft. without dropout or
been designed for use in indoor spaces up to 8,000 sq.ft. without dropout or
audio fading. Depending on specific conditions, the range of the
audio fading. Depending on specific conditions, the range of the
Dyna-Mic.01 may be farther in outdoor applications. Its near perfect audio
Dyna-Mic.01 may be farther in outdoor applications. Its near perfect audio
reproduction is making the Dyna-Mic.01 the preferred microphone system
reproduction is making the Dyna-Mic.01 the preferred microphone system
for professional musicians, disc jockeys, karaoke jockeys,
for professional musicians, disc jockeys, karaoke jockeys,
and home singing enthusiasts.
and home singing enthusiasts.
Handheld Microphone (Transmitter)
one of the
one of the
most technologically advanced
most technologically advanced
is
is
wireless system has been
wireless system has been
Receiver Base (Receiver)
R
FEATURES:
FEATURES:
1. Audio frequency response: 20 Hz to 20 KHz 1.5dB - streaming CD audio
1. Audio frequency response: 20 Hz to 20 KHz 1.5dB - streaming CD audio
quality
quality
2. Leading edge Adaptive Frequency Hopping Technology (AFHT at
2. Leading edge Adaptive Frequency Hopping Technology (AFHT at
2.4GHz/4mbps) digital wireless transmission and reception
2.4GHz/4mbps) digital wireless transmission and reception
3. Adaptive frequency hopping: 21 globally assigned public channels
3. Adaptive frequency hopping: 21 globally assigned public channels
resulting in extraordinarily high interference rejection
resulting in extraordinarily high interference rejection
4. Extremely low power consumption: Up to 25 hours continuous operation
4. Extremely low power consumption: Up to 25 hours continuous operation
on 2 alkaline batteries
on 2 alkaline batteries
5. Long range: 60 feet indoors / 180 feet outdoors effective
5. Long range: 60 feet indoors / 180 feet outdoors effective
transmission distance under normal conditions
transmission distance under normal conditions
6. Low Noise : <0.5mV
6. Low Noise : <0.5mV
7. Highly sensitive dynamic microphone
7. Highly sensitive dynamic microphone
HANDHELD MICROPHONE (TRANSMITTER)
HANDHELD MICROPHONE (TRANSMITTER)
Cardioid unidirectional microphone pickup -
1
The pickup converts voice or music to electronic signals.
Power indicator (red) -
2
The red power indicator illuminates when the microphone's
batteries are low.
Signal indicator (green) -
3
The green signal indicator illuminates and flashes once
c o m m u n i c a t i o n s a r e e s t a b l i s h e d b e t w e e n t h e w i r e l e s s
microphone and the receiver/base.
Power switch -
4
Moving the switch to the left position turns the power off while
moving the switch to the right turns the power on.
Mute switch -
5
Moving the mute switch down mutes the microphone while moving
the switch up allows for transmission of voice or music.
Battery cover -
6
Pressing lightly on the raised surface while sliding the cover
towards the bottom of the microphone reveals the battery
compartment. The handheld microphone operates on 2 AA
batteries. Insert batteries with the positive (+) (raised button end)
pointing to the top of the microphone.
1
(Mic)
(Mic)
Cardioid unidirectional microphone pickup
1
Power Indicator (Red)
2
Signal Indicator (Green)
3
4
Power Switch
5
Mute switch
Battery cover
6

Advertisement

loading

Summary of Contents for V2GO GO-852

  • Page 1 The AFHT HANDHELD MICROPHONE (TRANSMITTER) HANDHELD MICROPHONE (TRANSMITTER) design is creating a revolution in wireless systems, led by V2GO design is creating a revolution in wireless systems, led by V2GO Technologies, Inc.
  • Page 2 AC Adaptor is connected Press once to power on Your V2GO Dyna-Mic has been supplied with an audio connection cable. The small end of the cable connects to the receiver base as shown. Note that the connector has a polarization tab that must align with the slot in the receiver base's connector.
  • Page 3 3 Close up the cover. The V2GO Dyna-Mic.01 system can be operated simultaneously with a second V2GO Dyna-Mic.01 system. To avoid having the 2 systems interfere with one another, they must be assigned different frequencies. This is accomplished as follows: 1.
  • Page 4 >=25hrs hours hours and degrade the overall audio quality. However, when using the V2GO Dyna-Mic.01 outdoors on a breezy day, a foam windscreen is recommended. Envision the steel mesh of your handheld wireless microphone as an ELECTRONIC INTERFERENCE ISSUES: ELECTRONIC INTERFERENCE ISSUES: “eye ball”.

This manual is also suitable for:

Dyna-mic.01