DeLonghi DE91PYROS Installation And Service Instructions Use And Care Instructions page 47

Alert code Possible causes
A1
The oven has overheated.
Door lock error: the door
A2
cannot be locked after
you have started a Self
Clean cycle.
Door lock error: the door
A3
cannot be unlocked after
a Self Clean cycle has fin-
ished.
F
+ number Technical fault.
Should you still require assistance please contact our Customer Service Centre for
your nearest Authorised Delonghi Service Agent.
Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the right,
considering the characteristics of the models described here, at any time and without notice, to make eventual
necessary modifications for their construction or for commercial needs.
What to do
1. Allow the oven to cool down.
2. If the door is locked, wait until it auto-
matically unlocks.
3. Once the oven has cooled down and
the door has unlocked, the alert code
will disappear. You can now use the
oven again.
1. Turn the power to the oven off at the
wall and on again.
2. Wait approximately 10 seconds. This is
to allow the door lock to return to its
initial position.
3. Set the clock. See 'Setting the clock
and first use' for instructions.
4. Try starting a Self Clean cycle again,
making sure that you close the door
firmly. See 'Using the Self Clean func-
tion'.
1. Turn the power to the oven off at the
wall and on again.
2. Try pressing on the oven door to help
the door lock disengage.
3. If this doesn't help and the alert code
reappears, call your Authorised
Repairer or Customer Care.
1. Note down the alert code.
2. Wait until the cooling fans have
stopped and the oven has completely
cooled down.
3. Turn the power to the oven off at the
wall.
4. Call your Authorised Repairer or
Customer Care with the alert code
information.
47