Chapter 2 Familiar With The Compact Storage Server; Back Panel - Edimax NS-1500n Quick Installation Manual

Chapter 2 Familiar with the NS-1500n

2-1 Back Panel

Antenna SMA
Connector
Release/R.T.D
Button
1) LAN Port
You should connect the LAN port of the NS-1500n to your hub/switch, or
one LAN port of your router etc.
2) Power Jack
Plug the power adapter of the NS-1500n.
3) Release/R.T.D Button
Press this button release it immediately, the system will release the
external USB hard disk attached to the storage server. After the Storage
LED turning off, you can unplug the attached USB hard disk safely.
Press this button for more than 5 seconds until the Storage LED starts to
flash, the system will restore the factory default settings for the storage
server and restart it.
4) Antenna SMA Connector
Attach the antenna of the NS-1500n to get good wireless signal.
7
LAN Port
Power Jack