To Perform Manual Receive - Casio 5054 Manual

To perform manual receive

Receiving
W (WORK)
R (READY)
E-24
1. Place the watch on a stable surface so its 12 o'clock
side is facing towards a window (page E-15).
2. In the Timekeeping Mode, hold down A for about two
seconds until the watch beeps.
3. The digital display will go blank, and the left dial hand
will move to R (READY). This indicates that the watch is
getting ready for time calibration signal reception.
• See the information under "Signal Reception
Troubleshooting" (page E-27) if you experience
problems.
• The left dial hand will move to W (WORK) and stay there
while actual reception is in progress.
• If signal reception is unstable during reception, the left
dial hand may move between W (WORK) and
R (READY).
• The hour and minute hands continue to keep time
normally.