Multimedia User Guide Downloaded from LpManual.com Manuals...
Page 2
Windows is a U.S. registered trademark of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. Downloaded from LpManual.com Manuals...
Page 4
Product notice Downloaded from LpManual.com Manuals...
Table of contents 1 Using multimedia hardware Using the audio features ........................1 Important audio settings ...................... 2 Using the audio-in (microphone) jack .................. 3 Using the audio-out (headphone) jack ................. 3 Adjusting the volume ......................4 Using the Quick Launch buttons ......................5 Using the video features ........................
Using multimedia hardware Using the audio features The following illustration and table describe the audio features of the computer. Component Description Internal microphones (2) Record sound. Speakers (2) Produce sound. Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array microphone, or monaural microphone.
Important audio settings For best results, when you connect an audio or video device, such as a high-definition TV, to the HDMI port on your computer, follow these guidelines: ● Use QuickPlay as your software application. ● Set S/PDIF (Sony/Philips Digital Interface) as your default audio playback device. Otherwise, you may hear audio only through your computer speakers, not through the audio or video device.
Using the audio-in (microphone) jack The computer is equipped with a stereo (dual-channel) microphone jack that supports an optional stereo array or monaural microphone. Using sound recording software with external microphones allows for stereo recordings. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. Using the audio-out (headphone) jack WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,...
Adjusting the volume You can adjust the volume using the following controls: ● Computer volume buttons: ◦ To mute or restore volume, press the mute button (1). ◦ To decrease volume, press the volume down button (2). ◦ To increase volume, press the volume up button (3). NOTE: The tapping sound made by the volume button is enabled at the factory.
Using the Quick Launch buttons The media button (1) and DVD button (2) functions vary by model and installed software. With these buttons, you can watch movies, listen to music, and view pictures. Pressing the media button launches the QuickPlay program. Pressing the DVD button launches the DVD playback feature of the QuickPlay program.
Using the video features Using the external monitor port The external monitor port connects an external display device, such as an external monitor or a projector, to the computer. To connect a display device, connect the device cable to the external monitor port. ▲...
Using the S-Video-out jack (select models only) The 7-pin S-Video-out jack connects the computer to an optional S-Video device such as a television, VCR, camcorder, overhead projector, or video capture card. To transmit video signals through the S-Video-out jack, you need an S-Video cable, available from most electronics retailers.
The first time you access the webcam software, you may experience a brief delay as the software loads. For more information about using the webcam, see the HP Web site at http://www.hp.com/support. Select your language and search for notebook webcam.
Page 15
For optimum performance, observe the following guidelines while using the webcam: ● Be sure that you have the latest version of an instant message program before starting a video conversation. ● The webcam may not work properly across some network firewalls. If you are having trouble viewing or sending video to someone on another LAN or outside your network firewall, temporarily disable the firewall.
Adjusting webcam properties You can adjust the following webcam properties: ● Brightness—Controls the amount of light that is incorporated into the image. A higher brightness setting creates a brighter image; a lower brightness setting creates a darker image. ● Contrast—Controls the difference between lighter and darker areas on the image. A higher contrast setting intensifies the image;...
Using an optical drive Depending on the type of optical drive and software installed in your computer, the optical drive plays, copies, and creates CDs or DVDs. Identifying the installed optical drive Select Start > Computer. ▲ Inserting an optical disc (CD or DVD) Turn on the computer.
Removing an optical disc when running on battery or external power Press the release button (1) on the drive bezel to release the media tray, and then gently pull out the tray (2) until it stops. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
Removing an optical disc when no computer power is available Insert the end of a paper clip (1) into the release access in the front bezel of the drive. Press in gently on the paper clip until the tray is released, and then pull out the tray (2) until it stops. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
Using the media activity functions The media activity hotkeys and the media activity buttons (select models only) control the play of an audio CD or a DVD that is inserted into the optical drive. Using the media activity hotkeys A media activity hotkey is a combination of the key (1) and a function key.
Using the media activity buttons The following illustration and topics describe the functions of the media activity buttons. ● Previous/rewind button (1) ● Play/pause button (2) ● Next/fast forward button (3) ● Stop button (4) Previous/rewind button Media status Button Function Playing Previous/rewind button...
Next/fast forward button Media status Button Function Playing Next/fast forward button Plays the next track or chapter. Playing + next/fast forward button Fast forwards the playback. Stop button Media status Button Function Playing Stop button Stops the playback. Chapter 1 Using multimedia hardware Downloaded from LpManual.com Manuals...
Working with multimedia software The computer includes preinstalled multimedia software. Some computer models also include additional multimedia software on an optical disc. Depending on the hardware and software included with the computer, the following multimedia tasks may be supported: ● Playing digital media, including audio and video CDs, audio and video DVDs, and Internet radio ●...
Opening preinstalled multimedia software Select Start > All Programs. Click the program that you want to open. Installing multimedia software from a disc Insert the disc into the optical drive. When the installation wizard opens, follow the on-screen instructions. Restart the computer if prompted to do so. Using multimedia software Select Start >...
Preventing playback disruptions To reduce the possibility of playback disruption: ● Save your work and close all open programs before playing a CD or a DVD. ● Do not connect or disconnect hardware while playing a disc. Do not initiate Hibernation or Sleep while playing a disc. Otherwise, you may see a warning message asking if you want to continue.
Changing DVD region settings Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally. You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD drive.