Advertisement
Hub (underside)
Glass
tray
Turntable
shaft
Turntable ring
assembly
Remove all packing material and accessories. Examine the oven for any damage
such as dents or a broken door. Do not install the oven if it appears to be
damaged.
Remove any protective film found on the microwave oven surface.
: Do NOT remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
1. Select a level surface that provides enough open space for the intake
and/or outlet vents.
(1) The minimum installation height is 85cm.
(2)The rear surface of the microwave oven should be placed close to a
wall. Leave a minimum clearance of 30cm above the oven. A minimum
clearance of 20cm is required to either side between the oven and any
adjacent walls.
(3)Do not remove the legs from the bottom of the oven.
(4) Blocking the intake and/or outlet openings can damage the oven.
(5)Place the oven as far away from radios and TVs as possible. The
operation of the microwave can cause interference to your radio or
television reception.
2. Plug the microwave oven into a standard household electrical outlet.
3. Do not install over a range cooktop or other heat-producing appliance.
When the microwave oven is supplied with electricity, the oven will display
"0:00" and a tone will sound once. The input time should be between 0:00 –
23:59 (24 hour); 1:00 – 12:59 (12 hour).
Example: to set 12:12
1. Press "CLOCK/PRE-SET" once to select 24 hour time system or twice to
select 12 hour time system, whereupon either 24H or 12H will display.
2. Press the number buttons "1", "2", "1", "2" in that order.
1. Never place the glass tray upside down. The
glass tray should never be restricted.
2. Both glass tray and turntable ring assembly
must be used during cooking.
3. All food and containers of food should be
placed on the glass tray for cooking.
4. If the glass tray or turntable ring assembly
cracks or breaks, contact the Kogan customer
support team.
6
Advertisement
