ASROCK Z97 OC Formula User Manual page 18

* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status Description
Of No Link
Blinking Data Activity
On Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output Front Speaker
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Ater restarting your computer, you will ind the "Mixer" tool on your
system. Please select "Mixer ToolBox"
click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select
"Realtek HDA Primary output" to use the Rear Speaker, Central/Bass, and Front Speaker,
or select "Realtek HDA Audio 2nd output" to use the front panel audio.
Rear Speaker
(No. 11) (No. 9)
V --
V V
V V
V V
, click "Enable playback multi-streaming", and
Speed LED
Status Description
Of 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
Central / Bass
(No. 8)
--
--
V
V
Z97 OC Formula
Line In
(No. 10)
--
--
--
V
11