ASROCK X99 Extreme11 User Manual page 89

X99 Extreme11
Dehumidiier CPU Fan Setting
Conigure the speed of the CPU fan while Dehumidiier is enabled. he higher the
value, the faster the fan speed.
Max: 255
Min: 1
HDD Saver
By connecting your HDDs to the onboard SATA power connector with our special
designed power cable, you can switch these HDDs on and of when needed. his design
allows you to protect your privacy, save more energy, and prolong your HDDs' life spans.
HDD Saver Technology
Set [Enabled] to switch on the HDD Saver. Set [Disabled] to switch of the HDD Saver.
It is recommended to enable the AHCI Mode to fully support the HDD Saver. You can also
enable/disable the HDD Saver via the HDD Saver application under your OS.
Onboard SATA Power Switch (SATA_PWR_1)
Set [Power On] to switch on the onboard SATA Power Connector. Set [Power Of] to
switch of the onboard SATA Power Connector.
Re-detect SATA Power Connection
Re-detect your SATA Power connection. It is recommended to proceed the re-detection
for any changes of your HDD coniguration. You can also proceed the re-detection via the
HDD Saver application under your OS.
89