Light Kit - Hunter ceiling fan Owner's Manual

Light Kit

Connect the plugs from the upper and
lower switch housings. Make sure to line
up the colored markings on
the connectors.
Want to install your fan without a light kit?
Go to www.HunterFan.com/FAQs and click
"How do I install my fan without the light kit?"
Switch
Housing Notch
Screw
Partially install two of the switch housing
screws found in the bag. Align the
notches in the sides of the lower switch
housing with the upper switch housing
screws. Twist the lower switch housing
clockwise to lock into place.
14
M0065-01 • 04/23/13 • © Hunter Fan Company
www.HunterFan.com
Install the third switch housing screw.
Tighten all three screws securely.
Make sure the lower switch housing is securely attached to
the upper switch housing. Failure to properly secure all three
assembly screws could result in the light fixture falling.
1.888.830.1326