Alarm Time Setting; Advance Setting; User Management - Geeya GeeyaSuperCam Series User Manual

3.4.5. Alarm time setting

The device will trigger the alarm only during the scheduled time period, you can select
the scheduled time according to your request. Example of figure 20, set armed time from
Mon 8:30 to 9:30, you only need to click the corresponding time block to set them, the
time block will become green when you selected.
Note: Please make sure your system time is correct before you set the alarm time period.
Please refer to chapter 3.6.2 to set system time.

3.5. Advance setting

3.5.1. User management

There are 3 levels of user authorization in it.
Administrator: "admin" has the highest authority. It can do any settings.

default password: 123456.
User: user can only operate the device but can't do any settings.

password is user.
Guest: User can view the video, but can't operate the device.

is guest.
Note: Please change these 3 level passwords when your first use to ensure your safety.
Figure 20
Figure 21
The factory
The default
The default password
15