Download Print this page

Ada B200S Owner's Manual

Bipolar stereo guitar amplifier

B200S Bipolar Stereo Guitar Amplifier

OWNER'S MANUAL

Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 6

of april 2003. Original

ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and

may not be sold or placed on a website without permission of the editor.

Release No.1 for

http://www.adadepot.com

Table of Contents

Need help?

Do you have a question about the B200S and is the answer not in the manual?

Page 1 Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 6 of april 2003. Original ADA logo edited and rendered by Barend Onneweer of Raamw3rk.) The version of this manual is copyrighted and may not be sold or placed on a website without permission of the editor.
Page 2 ADA MP-1 MIDI TUBEPREAMP and SPLITSTACK SPEAKER CABINETS. Your new B200S will preserve all the tone and fidelity from your guitar, preamp, and effects units, while delivering warm, clean power to your speaker cabinets. Please take a few moments to read this manual and familiarize yourself with your new B200S.
Page 3 ADA B200S owner’s manual Page 3 of 4...
Page 4 ADA B200S owner’s manual SET UP Check impedance of speaker system to be used with the B200S. If you are using more than one cabinet per side refer to the speaker configuration diagram. An overall impedance from 4 ohms to 8 ohms is recommended for maximum performance.