When operating a power tool connected and properly used. Use outdoors, use an extension cord suitable for outdoor use. Use of a cord of these devices can reduce dust-related hazards. suitable for outdoor use reduces the risk of Belt sander WX661 WX661.1...
Do not use tools for purposes not identical replacement parts. This will intended; for example do not use circular ensure that the safety of the power tool is saws to cut tree limbs or logs. maintained. Belt sander WX661 WX661.1...
Form the habit of checking to see that keys ConneCTeD To A WATeR SUPPLy: and adjusting wrenches are removed from – Replacement of the plug or the supply the tool before turning it on. cord shall always be carried out by the Belt sander WX661 WX661.1...
14. Avoid kickback by sanding in accordance contain chemicals known to cause cancer, with directional arrows. Sand on birth defects or other reproductive harm. Belt sander WX661 WX661.1...
Page 7
Work in a well-ventilated area. Warning • Work with approved safety equipment, such as those dust masks that are specially designed to filter microscopic particles. Wear ear protection Wear eye protection Wear dust mask RCM approval mark Belt sander WX661 WX661.1...
Page 8
10. FRoNt HANDlE 11. SANDING bElt (See Fig. D) * 12. bASE-PlAtE (See Fig. D) 13. DUSt ExtRACtIoN ADAPtER (See Fig. F, G) * Not all the accessories illustrated or described are included in standard delivery. Belt sander WX661 WX661.1...
Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Belt sander WX661 WX661.1...
Pull the lever (7) to release the belt tension. Remove and fit a new belt over both rollers. ensure the direction of rotation arrows on the belt and the sander are the same. Close the lever to tension the belt. Belt sander WX661 WX661.1...
Then install onto the small pulley by rotating clockwise and pushing the drive belt shown around the small pulley at the same time. The drive belt will be a tight fit. Fit the belt cover and two screws. Belt sander WX661 WX661.1...
This is normal and will not damage your power tool. if the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Belt sander WX661 WX661.1...