Janome memory craft 2400 Instruction Book page 8

y
u
M
i
C
o
1
2
6
y Stitch Length Control Key
Stitch width and stitch length will show on the display.
To decrease the stitch length, press the "–" key.
The stitch length will decrease. To increase the stitch length, press the "+" key.
The stitch length will increase.
u Memory Key
When this key is pressed after selecting a pattern, the pattern will be memorized as
many times as the key is pressed. When the key is pressed after selecting another pattern,
that pattern will be memorized after the previously memorized pattern.
(Up to 50 patterns, including the locking stitch at the end, can be programmed in the
memory.)
i Clear Key
When this key is pressed before starting sewing, the memorized characters can be cleared
one by one.
When the key is pressed after starting sewing, the entire memorized program is cleared.
01
A 2 6
3 5
4
o Pattern Selection Keys
You can select these patterns by pressing the pattern
selection keys.
1. Display when the power switch is turned on and
Pattern 01 is selected.
2. Display when a pattern is selected, (Example:
Pattern 19.)
3. Pattern number and pattern
4. Recommended Foot
5. Suitable thread tension