Lenovo MIIX 3-1030 Hardware Maintenance Manual page 48

MIIX 3-1030 Hardware Maintenance Manual
Figure 10. Removal steps of keyboard dock back cover (on select models) (continued)
To separate the back cover and the upper case:
1. Insert a prying tool between the back cover and the dock upper case on the
lower-right corner of the keyboard dock. Slide it in the direction shown by arrow
5
to loosen the tabs and separate the two parts.
2. Loosen the tabs on the right and left side of the keyboard dock in the direction
shown by arrows and .
6 7
3. Insert the prying tool on the top side, slide it in the direction shown by arrow to
8
loosen the tabs on the top side.
Separate the back cover and the dock upper case in the direction shown by
arrows . Do not use too much force because the two parts are still connected
9
together by the USB board cable on the top side.
44