Tuning By Program Type (Pty Search); Reserving The Desired Information; Other - Kenwood KRF-A4020 Instruction Manual

Tuning by program type (PTY search)

16
This function lets you set the tuner to automatically search for
stations which are currently broadcasting the type of program
(genre) you want to listen to.
Under certain receiving conditions, it may take more
than 1 minute to complete the search.
• PTY search cannot be activated during EON override
reception.
Preparations
• Execute the RDS auto memory procedure.
• Set the broadcast band to "FM".
• Tune to a RDS station.
1
Press the PTY key to activate the PTY search mode.
SP. A B MUTE TA TP
N E W s
EON FM
TI. VOL AM
S.DIRECT
TAPE 2/MONI
When a RDS broadcast is received, the program type is
shown on the display. If no PTY data is available, or if the
station is not a RDS station, "NONE" is displayed.
2
While the "PTY" indicator is lit, use the MULTI
CONTROL to select the program type of your choice.
Program type table
Program Type Name
Pop Music
Rock Music
Easy Listening Music
Light Classical
Serious Classical
Other Music
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Weather
Finance
Children's programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
PTY STEREO
TUNED
AUTO
MHz
kHz
Display
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
Listening to radio broadcasts
"NO PROG" is displayed if this operation is attempted
before performing the RDS AUTO MEMORY operation.
3
Press the PTY key to start searching.
Example: Searching for a Rock Music broadcast.
Display while searching
Blinks
SP. A B MUTE PTY
R O C K M
EON
FM
AM
S.DIRECT
TAPE 2/MONI
Blinks for 2 seconds
Program type name display
Display when a station is received.
Goes out
TP PTY PTY
SP. A B MUTE
B B C 1 F M
EON FM
AM
S.DIRECT
TAPE 2/MONI
Station name display
• No sound is heard while "PTY" is blinking.
• If the desired program type cannot be found, "NO
PROG" is displayed, then after several seconds the
display returns to the original display.
To select another program type
Repeat steps 1, 2 and 3.

Reserving the desired information

When the receiver is tuned to a RDS EON station (a station at
which the "EON" indicator lights up), this function lets you
set the receiver to automatically switch stations to receive
news or traffic programs as they are broadcast. When the
broadcast is over, the receiver returns to the original station
automatically.
Preparation
• Set the broadcast band to "FM".
1
Complete steps 1 ~ 3 of "Presetting RDS stations
(RDS AUTO MEMORY)".
Skip this step if you have already completed the
RDS AUTO MEMORY procedure.
• The EON function will not work if all 30 FM preset
stations were stored manually using the procedure shown
in "Presetting radio stations manually".
Be sure to use the RDS AUTO MEMORY function.
KRF-A4020 (En/E2T)
STEREO
TUNED
AUTO
MHz
kHz
STEREO
TUNED
AUTO
MHz
kHz
#
$
%
Continued to next page