Battery - Husqvarna PP220 Operator's Manual

Wall saw
Hide thumbs Also See for PP220:
Table of Contents

Advertisement

Available languages

Available languages

Battery

The battery is a Li-ion type. Operating time is about 8-10
hours per charge. Extreme cold impairs the battery's
capacity and operating time. Operating time is also
affected by the extent to which the display has been
active.
Use only original batteries for this product. Contact your
dealer for more information.
An exhausted battery must not be disposed of as
household garbage! Leave it at your nearest service
agent or collection point.
Insert / remove battery
Insert / remove the battery.
MENU SYSTEM
Charge the battery
Before using the remote control for the first time the
battery has to be charged.
To charge with the battery charger
Charging time for a flat battery is approx. 2-3 hours. The
diode is orange when charging starts and becomes green
when the battery is fully charged. When the battery is fully
charged the charger supplies the battery with
maintenance current until the battery is removed from the
charger.
Keep the battery charger dry and protected against
temperature fluctuations.
To charge with the CAN cable
The charging efficiency with the CAN cable is less than
with the battery charger and it therefore takes a bit longer
to charge the battery. The remote control works as normal
during charging, however.
English
17

Advertisement

Table of Contents
loading

Table of Contents