Appendix - Marantz HD-DAC1 Owner's Manual

Contents Connections
o USB memory devices cannot be played back
Symptom
"No USB Device", "Error 1"
0
or "Error 2" is displayed.
0
0
0
0
Files on the USB memory
0
device are not displayed or
0
"Error 3" is displayed.
0
Files on a USB memory
0
device cannot be played.
0
0
Front panel Display
Playback
This unit may not recognize the USB memory device due to poor connection, etc. Make sure that the
connection is made properly by taking actions such as disconnecting and reconnecting the USB memory
device.
Mass storage class compatible USB memory devices are supported.
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
The USB memory device must be formatted to FAT16 or FAT32.
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files of a type not supported by this unit are not displayed.
This unit can display a file structure with up to 8 levels, up to 700 folders and up to 65,535 files in total.
Modify the folder structure of the USB memory device.
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
Files that are copyright protected cannot be played on this unit.
If a file is unplayable, "Error 5" is displayed and the next file is played.
Rear panel
Settings
Cause / Solution
57 Remote
Tips

Appendix

Page
Index
20
－
－
－
－
42
－
－
42
－
－