Amp Gain - Marantz HD-DAC1 Owner's Manual

Contents Connections

AMP Gain

Set the gain of the headphone amplifier. Set this according to the
impedance of the connected headphones. It is recommended that this is
set on the "Low" side if the headphones have low impedance and on the
"High" side if they have high impedance.
Low Set the gain of the headphone amplifier to
(Default): "Low".
Set the gain of the headphone amplifier to
Mid:
"Mid".
Set the gain of the headphone amplifier to
High:
"High".
NOTE
The headphone volume varies depending on the "AMP Gain" setting. Decrease the
volume or mute the audio first if changing this setting while listening to audio.
Front panel Display
Playback Settings
Dimmer
This switches the brightness of the display.
Off:
Dark:
Dim:
Bright
(Default):
You can also adjust the display by pressing DIMMER on the remote control unit.
iPodMode
Set whether to operate the iPod from this unit or on the iPod.
Direct
(Default):
Remote:
Operation mode can also be switched by pressing MODE on the remote control unit.
Rear panel 49
Tips
Turns the display off.
Very low display brightness.
Reduced display brightness.
Normal display brightness.
Operate the iPod on the iPod itself.
Operate the iPod from this unit and the remote
control unit.
Remote Index
Appendix