19) Peel off and remove the QWERTY DOMESHEET. Do
not use it again. Discard it.
21) Separate the QWERTY KEYMAT from the QWERTY
FRAME.
23) Use the SRT-6 to open the clip holding the A-
COVER.
15
20) Remove the QWERTY FRAME and the QWERTY
KEYMAT.
22) Unscrew the three TORX+ size 4 screws in the
order shown. Do not use them again. Discard them.
24) Open also the second clip with the SRT-6.
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia C6-00
RM-612, RM-624
Service Manual Level 1&2
Version 1.0
ISSUE 1