Surround Play - Kenwood KRF-V8060D Instruction Manual

Ambience effects

Surround play

The DTS compatible models can reproduce a CD, DVD, or LD carrying the
DTS mark.
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the mark and DOLBY DIGITAL format digital broadcasts (etc.).
DOLBY PRO LOGIC can be used when playing video, DVD, or LD
software bearing the
SRS Circle Surround II enables you to listen to multi channel sound from
the stereo source.
DSP
Input Selector
INPUT MODE
INPUT
SELECTOR
Preparations
• Turn ON related components.
• Complete "Preparing for surround sound" (speaker settings).
• Use the Input Selector keys to select the component you wish to play
back with surround sound.
• Use the INPUT MODE key to select the input mode (analog or digital)
for the source you wish to play back.
• Noise will be produced when a DTS source is played by selecting the
analog input.
1
Start playing the video software.
2
Use the LISTEN MODE knob or LISTEN MODE % / fi keys to
select the listening mode.
The listening mode settings are stored separately for each input. If
the input mode is set to full auto ("AUTO DETECT" lights), the
receiver selects the optimal listening mode automatically based on
the type of input signal and the speaker settings.
Each turn of the LISTEN MODE knob or press of the LISTEN
MODE %/fi keys switches the setting as listed below.
The listening mode settings are different depending on the type
of input signal.
When the DOLBY DIGITAL signal is input :
(The DOLBY DIGITAL or PRO LOGIC, indicator lights up.)
1 DOLBY DIGITAL : DOLBY DIGITAL surround.
2 DOLBY D EX
: DOLBY DIGITAL EX surround.
3 PLII MOVIE
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
4 PLII MUSIC
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
5 PRO LOGIC
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
6 STEREO
: Normal stereo playback.
30 EN
mark.
INPUT MODE
LISTEN MODE
LISTEN MODE %/ fi
DSP MODE
When you select DOLBY DIGITAL
"DOLBY DIGITAL" will be displayed.
SP
A B
L C SW R
LFE
SL SB SR
When the DTS or DTS-ES (matrix or discrete) signal is input :
1 DTS 5.1ch
2 DTS MATRIX
3 DTS DISCRETE : (DISCRETE indicator lights up.)
4 STEREO
When the analog signal or the digital signal (except for
DOLBY DIGITAL or DTS signal) is input :
1 PLII MOVIE
2 PLII MUSIC
3 PRO LOGIC
4 NEO:CINEMA : NEO:6 surround.
5 NEO:MUSIC : NEO:6 surround.
6 CSII CINEMA : CS 6.1 surround.
7 CSII MUSIC : CS 6.1 surround.
8 CSII MONO : CS 6.1 surround.
9 STEREO
)
• Dolby Digital or DTS signal having more channels than the maxi-
mum number of playback channels available using the receiver's
current settings is input, downmixing is performed to match the
8
number of available channels.
CINEMA EQ. DTS.
MUTE OPTICAL 6CH INPUT
AUTO DETECT DOLBY DIGITAL
ACTIVE EQ. MATRIX
CLIP
COAXIAL ANALOG 96kHzfs DSP MODE DISCRETE PRO LOGIC
: (DTS indicator lights up.)
: (DTS MATRIX indicator lights up.)
: PRO LOGIC II surround MOVIE mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround MUSIC mode.
(The PRO LOGIC indicator lights up.)
: PRO LOGIC II surround PRO LOGIC mode.
(The PRO LOGIC indicator lights up.)
(The NEO:6 indicator lights up.)
(The NEO:6 indicator lights up.)
(The CS II indicator lights up.)
(The CS II indicator lights up.)
(The CS II indicator lights up.)
: Normal stereo playback. Sound is produced
from the two front channels only.
(The STEREO indicator lights up.)
STEREO NEO:6 RDS
THX
RTY
Surround EX
LOUDNESS CSII
AUTO
MEMO
STEREO
TUNED