SPOT TRACE User Manual page 9

LEARN MORE
Visit FindMeSPOT.com for the latest information on SPOT TRACE and other SPOT products and
services. We encourage you to visit the FAQ section on FindMeSPOT.com for more helpful tips. If you
can't find what you're looking for, please do not hesitate to contact us.
CUSTOMER CARE
Visit FindMeSPOT.com or call:
• North American Customers: 866.OK1.SPOT (866.651.7768)
• European Customers: Tel: +353 1 290 9505
LIMITED WARRANTY
Your SPOT TRACE has a Limited Warranty for 12 months (24 months for European Customers) from
the date of purchase against defects in materials and workmanship only. For full details regarding
the Limited Warranty and warranty claim procedures, visit SPOTwarranty.com or FindMeSPOT.com.
DECLARATION OF CONFORMITY FOR EUROPEAN CUSTOMERS
Hereby, Globalstar Europe Satellite Services Ltd., declares that this SPOT TRACE, is in compliance
with the essential requirements and other relevant provisions of Directive 1995/5/EC. The declaration
of conformity may be consulted at FindMeSPOT.eu/trace
EXCEPT AS PROVIDED ABOVE, THE PRODUCT IS SOLD "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES FOR THE
PRODUCT WHATSOEVER, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES REGARDING THE CONDITION,
DESIGN, SPECIFICATIONS, WORKMANSHIP, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT,
OR ANY WARRANTIES THAT THE PRODUCT IS FREE FROM LATENT DEFECTS OR DEFICIENCIES, OR THAT THE PRODUCT IS
FREE FROM INFRINGEMENT OF ANY PATENT, TRADEMARK, COPYRIGHT OR PROPRIETARY RIGHT OF ANY THIRD PARTY AND
SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
THIS LIMITED WARRANTY PROVIDES THE SOLE AND EXCLUSIVE REMEDY FOR ANY DEFECTS IN THE PRODUCT. IN NO EVENT
SHALL WE BE LIABLE FOR ANY INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES, WHETHER IN
CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE. OUR LIABILITY IS LIMITED TO THE AMOUNT YOU PAID
FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM. THE APPLICABILITY OF THE ABOVE LIMITATIONS AND EXCLUSIONS
MAY VARY FROM STATE TO STATE, OR COUNTRY TO COUNTRY.
16
IE
Not to be Marketed in the Republic of Ireland
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between
the equipment and receiver. c) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected. d) Consult the dealer or an experienced radio/TV technician for help.
This device generates radio frequency energy at
a low duty cycle (<1%). Transmitter on-time is
dependent on configurable operational modes with
a maximum of two 1.44 second long transmissions
per five minute period. Satellite transmissions are
23.5 dBm EIRP. Based on these figures, the device
has been exempted from SAR testing. Example Max
Duty Cycle Timing Diagram:
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
This device complies with the requirements for Radio Astronomy Site avoidance as specified by the Globalstar National
Science Foundation agreement of 2001. It is compliant with CFR25.213
This device automatically adjusts its transmission frequency according to its location and is compliant with international
regulatory requirements.
Spot G en3 M aximum D uty C ycle
25
20
15
10
5
0
0 30 60 90 120 150 180 210 240 270 300 330 360 390 420 450
Time ( sec)
480 510 540 570
17