The Oneremote Converter For Beo4 - OneRemote RMB4 User Manual

The OneRemote Converter for the Beo4 Remote Control
The OneRemote converter is a small microcomputer module specifically designed to be installed in a Bang & Olufsen
Beo4 remote control terminal.
The microcomputer is converting commands meant for Bang & Olufsen equipment to commands for third party
equipment of various types.
Each OneRemote converter type is programmed to control a specific product like an Apple iPod docking station, a flat
panel TV, a curtain controller etc.
The converter enables the Beo4 to control a third party device, while still being able to control any other Bang & Olufsen
product.
With a Bang & Olufsen audio master in the room it may be used for handling the TV sound. Speakers connected to an audio master are usually of a
much better quality than the speakers in a flat panel TV. In a B&O link room setup with BeoLink Active you may also use the active speakers to improve
sound from most TVs.
Only a simple audio cable is needed between the TV and the audio master. See the option programming section about B and
modes on
page 9.
www.oneremote.dk
Page 3