List of Contents Getting Started………....................page The OneRemote Converter for Beo4 ................ page Controlling with OneRemote................... page Coloured Function Keys................... page Go, Joystick or Stop Shifted Operation..............page Control Table for Beo4 with a O Key or Beo4 Navi in mode 2......
LG TV with this Beo4 in mode 2. If the OneRemote converter has not yet been optimized for your setup, you might want to refer to the installation section below about the initial setup and option programming. No programming is needed during everyday use.
The microcomputer is converting commands meant for Bang & Olufsen equipment to commands for third party equipment of various types. Each OneRemote converter type is programmed to control a specific product like an Apple iPod docking station, a flat panel TV, a curtain controller etc.
Controlling with OneRemote Controlling a non-B&O TV using the OneRemote RMB4 modified Beo4 requires the user to be familiar with the original remote control as described in the TV’s user manual. A Beo4 remote control is not equipped with as many keys as found in most other remotes. But by combining specific key entries on the OneRemote RMB4 a suitable control layout has been developed.
*2 As the direct function of the coloured function keys has been Ratio assigned to other functions, these have to be preceded with a retrieve the actual coloured function. Exit Green function Yellow function Red function Blue function www.oneremote.dk Page 5...
Page 7
Control Table for Beo4 with a Joystick type without a O Key mode 1 or 3 This table shows the converted keys for a OneRemote RMB4 converter installed in a Beo4 Navi type remote control. Beo4 Navi has a joystick (=) instead of the O key.
Setting the Zap Mode Option - when Beo4 is in mode 1 or 3 (Navi) If the OneRemote converter is installed in a Beo4 with aO key, the keysW are used for programme stepping. The keys are used to manoeuvre up and down in on-screen menus.
TV mode. If a Bang & Olufsen audio master is in the room, it is possible to use it for handling the sound. Below options determine how the One Remote RMB4 handles volume in the TV mode.