Electrical Connection - Miele KM 421 Installation Instructions Manual

Electrical connection

All electrical work should be by a
qualified electrician in accordance
with local and national codes.
To reduce the risk of electric shock,
disconnect the power supply by
tripping the circuit breaker or
removing the fuse to the unit before
installation or service.
^ Note to the installer:
Please leave these instructions with
the consumer.
Power supply:
Please check the data plate.
KM 421:
– 240 VAC, 60 Hz, 30 A fuse rating
– 208 VAC, 60 Hz, 30 A fuse rating
KM 424:
– 240 VAC, 60 Hz, 40 A fuse rating
– 208 VAC, 60 Hz, 40 A fuse rating
KM 427:
– 240 VAC, 60 Hz, 50 A fuse rating
– 208 VAC, 60 Hz, 50 A fuse rating
Make sure your electrical supply
matches the data plate.
10
Important
The appliance is provided with 3 leads;
L1 (black), L2 (red) and GND (green).
They must be connected to a
dedicated line through the use of an
approved junction box.
For further information, see the wiring
diagram provided with the appliance.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED!