Nokia Observation camera Support Manual page 7

If your network operator provides MMS settings via OTA (over the air) configuration
messages then
•
From PC Suite left hand side menu bar choose
•
Go to Connection tab
•
MMS settings over the air
•
Now click on "Get"
Now you should see "Get MMS Settings" window on the screen (Figure 7)
Figure 7.
Enter the MMS service provider's service number and command.
When operator settings arrive, a message is shown in the PC-Suite: "Operator settings
received, do you want to import settings to PC Suite?" By answering Yes you can see the
settings received message.
If your MMS service provider does not provide OTA configuration, enter the settings in the
"Connection" window according to your service provider's information.
If needed, enter your network service provider's SMS centre number to the "SMSC" field.
This is required if your SIM card doesn't already have this number and you wish to get SMS
notifications from the Nokia Observation Camera. If you encounter problems in setting the
SMSC number with PC Suite application you can set it also with your GSM phone via SMS.
After you have successfully set the Connection and General Settings you can configure the
Automatic Imaging (Figure 8) and Thermometer (Figure 9).
5/9