Advertisement
5. Insert the wall tube into the wall mounting bracket
and secure using 2 off M6 U bolts and 4 off M6 nuts.
Note:
If the horizontal angle of the antenna from the wall is
between +/- 55 degrees then the short end of the wall
tube should be fixed to the wall mount. If the angle is to
increase above 55 degrees (+/- 90 degrees) then the long
end should be fixed to the wall mount.
6. After the wall mount has been fixed to the wall, clamp
the antenna assembly to the wall mount assembly using
2 off M6 U bolts and 4 off M6 nuts.
The 3 zones indicated in the illustration
above correspond to the numbered skew
settings on the LNB casing, only positions
2, 3 and 4 are relevant for the British Isles
5
6
Advertisement
