Picture Setting - Sandstrom S22FED12 Instruction Manual

Picture Setting

Allows you to set your preferred picture mode.
1. Press the MENU button and then press the
PICTURE menu and then press the OK button.
2. Press the
press the OK button.
GB
3. Press the
setting.
Picture Mode
Colour
Temperature
26
S22_24FED12_IB_120508_Annie.indd 26
buttons to select the following picture options and then
buttons to select the options. Press the OK button and then press the
Cycles among picture mode: Standard / Mild / User / Dynamic.
Alternative
You may press the P.MODE button to select the picture mode directly.
Contrast
Adjusts the difference between light and dark levels
in the picture (for User mode).
Brightness Increases or decreases the amount of white in the
picture (for User mode).
Colour Controls the colour intensity (for User mode).
Sharpness Adjusts the level of crispness in the edges between
light and dark areas of the picture (for User mode).
Tint (For NTSC Adjusts the balance between red and green levels
format) (Tint is only available for NTSC signal reception).
Cycles among colour temperature: Medium / Cool / User / Warm.
Adjusts the colour components independently to achieve a warm or cool
(for User mode).
• Red: Increases red tint
• Green:
Increases green tint
• Blue:
Increases blue tint
buttons to select the
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Picture Mode Standard
Colour Temperature
Aspect Ratio
Noise Reduction
Screen
buttons to adjust each option's
Picture Mode Standard
Contrast 82
Brightness 50
Colour 50
Sharpness 50
Tint 50
BACK EXIT MENU
Colour Temperature Medium
Red 40
Green 31
Blue 50
BACK EXIT MENU
12年5月8日 下午7:28