Initial Setup; Turning The Tv On For The First Time - Sandstrom S22FED12 Instruction Manual

Initial Setup

Turning the TV On for the First Time

1. Connect one end of the RF coaxial cable to the
aerial socket on the wall and the other end of the
cable to the RF (75Ω) socket at the rear right side
of your TV.
Do not connect the TV to the mains
supply until you have completed all the
connections.
2. Connect the mains cable to the mains socket after
you have completed all the connections.
3. At this stage, the TV switches to standby mode. The
red LED indicator will illuminate on the front panel of
the TV.
4. In standby mode, press the
panel of the TV or on the remote control to turn the
TV on. The red LED indicator will turn blue.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The button on the right side panel of the TV or on the remote control is only used for switching the TV into standby, it
does not disconnect the TV from the mains power. To completely disconnect the mains power, please remove the mains
plug from the mains socket.
5. The first time you turn the TV on, it will go straight into the First Time
Installation menu. Please ensure the aerial is plugged in and then press
the OK button. (If you have already installed the TV using the Quick Start
Guide, please go to the section "Selecting the Input Source" on the next
page.)
6. Press the
buttons to navigate the menu and change the
settings. Press the OK button to confirm.
OSD Language
Country
S22_24FED12_IB_120508_Annie.indd 17
button on the right side
Select your desired language to be displayed on
the menu. The default on-screen menu language
is set as English.
Select the country where you will operate the TV.
The default country is set as UK.
Y Y Pb Pb Fr Fr SCART SCART
R R L L VIDEO VIDEO
COMMON INTERFACE (CI) COMMON INTERFACE (CI)
USB USB HDMI2 HDMI2 HDMI1 HDMI1
HEADPHONE HEADPHONE PC AUDIO PC AUDIO
Y Pb Fr
R L VIDEO
Please ensure aerial is plugged in!
Then press OK button.
Cesky
Dansk
Deutsch
UK
Australia
Austria
OR
RF coaxial cable
(not included)
PC IN PC IN RF RF
SCART To the mains
socket
First Time Installation
OSD Language
English Magyar Polski
Fran ais
~
Espanol
Hrvatski Nederlands Portugues
E k Italiano Norsk Pycck
OK
Country
Belgium Czech France Hungary
Bulgaria Denmark Germany Italy
Croatia Finland Greece Luxembourg
OK
GB
17
12年5月8日 下午7:28