Features And Controls - Briggs & Stratton Pressure Washer Operator's Manual

2.700 psi
Hide thumbs Also See for Pressure Washer:
Table of Contents

Advertisement

Available languages

Available languages

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
C - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
D - Recoil Starter — Used for starting the engine manually.
E - Oil Fill/Dipstick — Check, add and drain engine oil here.
F - Engine Identification — Provides model, type and code
of engine. Please have these readily available if calling for
assistance.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Engine Rocker Switch — Push this switch to on position
(I) before using recoil starter. Push switch to off position
(O) for shutting off engine.
J - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
10
K - Pump — Develops high pressure.
L - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
M - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
N - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
P - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
R - Spray Tips — Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
High Pressure Outlet — Connection for high pressure hose.
Water Inlet — Connection for garden hose.
R
P
N
M
L
K
J
BRIGGSandSTRATTON.COM

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents