Table Of Contents - Bush Hog 3715 Operator's Manual

3715/3710 ROTARY CUTTER
SECTION/PARA
Warranty ................................................2
Dealer Preparation Check List ...............3
Safety Alert Symbols..............................4
Safety Precautions.................................5
Federal Laws and Regulations ..............6
I. INTRODUCTION & DESCRIPTION ......7
1-1 Introduction ......................................7
1-2 Description.......................................7
II. PREPARATION FOR USE ....................8
2-1 Attaching To Tractor .......................8
2-2 Optional Valve Mounting
Bracket Installation ..........................8
2-3 Pitch Adjustment..............................8
2-4 Wing Adjustment..............................9
III.OPERATING INSTRUCTIONS............10
3-1 General Safety...............................10
3-2 Transporting...................................10
3-3 Operation .......................................10
RETAIL CUSTOMER'S RESPONSIBILITY
UNDER THE BUSH HOG WARRANTY
It is the Retail Customer and/or Operator's responsibility to read the Operator's Manual, to op-
erate, lubricate, maintain and store the product in accordance with all instructions and safety
procedures. Failure of the operator to read the Operator's Manual is a misuse of this equipment.
It is the Retail Customer and/or Operator's responsibility to inspect the product and to have any
part(s) repaired or replaced when continued operation would cause damage or excessive wear
to other parts or cause a safety hazard.
It is the Retail Customer's responsibility to deliver the product to the authorized Bush Hog
Dealer, from whom he purchased it, for service or replacement of defective parts which are cov-
ered by warranty. Repairs to be submitted for warranty consideration must be made within
forty-five (45) days of failure.
It is the Retail Customer's responsibility for any cost incurred by the Dealer for traveling to or
hauling of the product for the purpose of performing a warranty obligation or inspection.

TABLE OF CONTENTS

PAGE
1
SECTION/PARA
IV. MAINTENANCE ..................................11
4-1 Maintenance Check List ................11
4-2 Lubrication .....................................11
4-3 Blade Replacement .......................13
4-4 Slip Clutch Operational Check.......13
4-5 Slip Clutch Adjustment...................13
4-6 Troubleshooting .............................13
V. ASSEMBLY..........................................17
5-1 Model 3715 Assembly ...................17
5-2 Model 3710 Assembly ...................21
5-3 Safety Chain Installation ................21
5-4 Band Installation ............................22
5-5 Front Belting ..................................22
Hydraulic Diagrams .....................23 & 24
Safety Decals ..............................25 & 26
Torque Specifications ..........................27
PAGE