Station wagon
1. On left-hand side, fold down the
blind and remove.
2. Remove cover.
3. Unscrew two plastic securing nuts
from the inside by hand.
Vehicle care
4. Carefully remove tail light
assembly. Take care that the
cable duct remains in position.
Detach wiring plug from bulb
holder.
5. Remove and replace the bulb.
Tail lights (1 + 2)
Turn signal light (3)
Brake light (4)
6. Connect the wiring plug and press
the cable into the retainer. Install
tail light assembly in tailgate and
tighten securing nuts. Close
cover.
Back to overview
171