Operation Of The Installation; User Interface - Fujitsu Heat pump, split, single service Operation Manual

Heat pump, split, single service

3 Operation of the installation

User interface

3.1
1
2
3
4
Ref.
Function
1
Selection of the DHW operating mode
(Domestic hot water)
2
Digital display
3 Exit "ESC"
4
Navigation and setting
6
User interface
°C
Room thermostat (option)
ON
Off
5
6
7
8
9
10
11
12
13
Figure 2
- Definitions
- If the installation is fitted with a DHW tank.
- ON: Production of DHW according to the time program.
- Off: No domestic hot water heating, anti-frost function is active.
- Boost: Hold down the DHW key for 3 seconds. Immediate DHW
operation after use of the electrical back-ups until the DHW
comfort setting has been reached
- Operating control. Readout of the current temperature, of the
heating mode and of any faults
- View the settings
- Quit the menu.
- Selecting the menu.
- Setting parameters.
- Adjusting the ambient temperature setpoint.
Remote control (option)
.
Instruction manual "1353-EN"