Instructions To Be Read Before Using The Equipment; Safety Instructions; Start-Up; Use - Fujitsu Heat pump, split, single service Operation Manual

Heat pump, split, single service
1 I n s t r u c t i o n s t o b e r e a d b e f o r e u s i n g t h e
equipment.
Please comply with the following instructions in order
to avoid any risk of injury or inappropriate use of the
appliance.

Safety instructions

1.1

1.1.1 Start-up

Do not switch the appliance on until every
F
fillings have been done.
Do not try to install this appliance yourself.
F
This heat pump requires an appropriately
F
qualified person to install it.
The installation must always be connected to
F
the Earth and fitted with a protective circuit
breaker.
Do not modify the electricity supply.
F
The appliances are not fireproof and should
F
therefore not be installed in a potentially
explosive atmosphere.

1.1.2 Use

Do not let children insert foreign bodies into
F
the fan protection grill or climb on top of the
outside unit. The fins on the air exchanger are
extremely fine and cause cuts.
Nothing should obstruct the air circulation
F
through the evaporator and from the fan.
Do not climb on the top of the outside unit.
F
The room in which the appliance is operating
F
must be correctly ventilated in order to
prevent any loss of oxygen if there is an
escape of refrigerant gas.
Consult your Installer before making any
F
changes or modifications to the premises
where the appliance is installed.
Do not place any heat source under the
F
remote control.
Instruction manual "1353-EN"

1.1.3 Maintenance

Do not try to repair this appliance yourself.
F
T h i s a p p l i a n c e d o e s n o t c o n t a i n a n y
F
components capable of being repaired by the
user himself. Removing one or other of the
c o v e r s c a n e x p o s e y o u t o d a n g e r o u s
electrical voltages.
In any case, switching off the current is not
F
sufficient to protect you from any external
electrical shocks (capacitors)
Do not open the outside unit or the hydraulic
F
unit while they are operating.
Switch off the power supply if there are any
F
abnormal noises, smells or smoke coming
from the appliance and contact your installer.
Switch off the power to the appliance before
F
you clean it.
Do not use aggressive cleaning liquid or
F
solvents to clean the body work.
Do not use a pressure washer to clean the
F
outside unit. This could damage the air
exchanger and the water might penetrate into
the electrical circuits.
3