Adjustment - JVC KD-DV6105 Service Manual

QQ
3 7 63 1515 0
4.1 Test instruments required for adjustment
(1) Digital oscilloscope (100MHz)
(2) Jitter meter
(3) Digital tester
(4) Electric voltmeter
(5) Tracking offset meter
(6) Test Disc : VT501 or VT502
(7) Extension studs : STDV001-3P
(8) Extension cable : EXTDV002-30P
4.3 Connection method
Connection procedure
(1) Attach the front chassis assembly to the main board.
(2) Connect the front panel assembly to the main board.
(3) Attach the heat sink and rear bracket to the main board.
(4) Attach the extension studs to the DVD mechanism assembly.
(5) Connect the DVD mechanism assembly and the main board with a extension cable.
TE
L 13942296513
Extension cable
EXTDV002-30P
www
.
http://www.xiaoyu163.com
Heat sink
Main board
x ao
y
i
http://www.xiaoyu163.com
SECTION 4
8

ADJUSTMENT

4.2 Standard measuring conditions
Power supply voltage
Load impedance
Line Output
Caution:
Be sure to attach the heat sink and rear bracket onto the power
amplifier IC and regulator IC respectively, before supply the
power. If voltage is applied without attaching these parts, the
power amplifier IC and regulator IC will be destroyed by heat.
Q Q
3 6 7 1 3
Rear bracket
Extension studs
STDV001-3P
u163
.
2 9 9 4 2 8
DC14.4V(11 to 16V)
4Ω(2 Speakers connection)
20KΩ
1 5 0 5 8 2 9 9 4
Extension stud
STDV001-3P
m
co
9 9
2 8 9 9
(No.MA158)1-21