Table of Contents
Advertisement
Quick Links
Dimmer push-button/2-way low voltage
Dimmer push-button/2-way low voltage
Order No. : 2262 00
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Fire hazard. For operation with inductive transformers, each transformer must be fused
on the primary side in accordance with the manufacturer's instructions. Only safety
transformers according to EN 61558-2-6 may be used.
Do not connect any LED or compact fluorescent lamps that are not specifically suitable
for dimming. Device can be damaged.
Do not connect any lights with integrated dimmers. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Dimmer
(2) Frame
(3) Central plate
(4) Control button
(5) Fuse holder
(6) Measuring points for voltage test
(7) Release lever for plug terminal
(8) Setter, minimum brightness
32534532
10499194 I00
20.12.2013
1/6
Advertisement
Table of Contents
Related Manuals for Gira push-button/2-way low voltage
Summary of Contents for Gira push-button/2-way low voltage
- Page 1 Dimmer push-button/2-way low voltage Dimmer push-button/2-way low voltage Order No. : 2262 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully.
- Page 2 Dimmer push-button/2-way low voltage 3 Function Intended use Switching and dimming of incandescent lamps, HV halogen lamps as well as dimmable inductive transformers with halogen or LED lamps. Switching and dimming dimmable HV-LED lamps or compact fluorescent lamps. Installation in appliance box according to DIN 49073.
- Page 3 Dimmer push-button/2-way low voltage Connecting and mounting the dimmer Figure 2: Connection diagram Figure 3: Changeover switch Remove approx. 15 mm of insulation from the connecting cables. Connect the dimmer (1) according to the connection diagram (Figure 2). Alternatively, install with a changeover switch (10) (Figure 3).
- Page 4 Dimmer push-button/2-way low voltage 5.2 Commissioning Setting the minimum brightness The minimum brightness can be set by an electrically skilled person as required. DANGER! Electrical shock when live parts are touched. Electrical shocks can be fatal. Use only insulated tools to set the minimum brightness! Cover up live parts in the working environment.
-
Page 5: Troubleshooting
Dimmer push-button/2-way low voltage Figure 4: Load curve of mixed loads i Mixed-load operation of LED lamps or compact fluorescent lamps with other permissible loads possible. Note load curve (Figure 4). Power reduction when surface-mounted 20 ... 450 W/VA per 5°C in excess of 25°C... - Page 6 The warranty is provided in accordance with statutory requirements via the specialist trade. Please submit or send faulty devices postage paid together with an error description to your responsible salesperson (specialist trade/installation company/electrical specialist trade). They will forward the devices to the Gira Service Center. Gira Giersiepen GmbH & Co. KG...
Need help?
Do you have a question about the push-button/2-way low voltage and is the answer not in the manual?
Questions and answers