Samsung SCX 3205 Service Manual page 110

7) Uneven Density
Description : Print Density is uneven between left and right.
1. The pressure force on
the left and right springs of the
transfer roller is not even, the springs are
damaged, the transfer roller is improperly
installed, or the transfer roller
2. The toner level is not even
on the developer roller due to the
Service Manual
Alignment and Troubleshooting
bushing or holder is
damaged.
bad blade.
Replace both the left and right
Spring Holder.
Occur in the developer cartridge,
replace the developer and try to
print out.
4-50
Samsung Electronics