Humminbird 688ci HD DI Operation Manual page 59

Recording and Playback
The Recording feature records active sonar information. When the recording is
played back, the views that were active during the recording are available in
Playback. The Recording and Playback feature is available when an optional-
purchase SD memory card is installed and Screen Snapshot is On (see Setup
Menu Tab: Screen Snapshot). Saved Recordings can be played back from the
Snapshot and Recording View.
Start Recording
Notes about Recording:
• While recording, press the EXIT key to exit the Snapshot and Recording
X-Press™ Menu and scroll to a different view. Recording will continue.
• The slider bar at the bottom of the Snapshot and Recording View shows
the recording progress and remaining space on the SD memory card.
• Pings Per Second: For maximum performance, keep the Pings Per
Second setting on Auto (see Snapshot and Recording X-Press™ Menu).
• Viewing saved Screen Snapshots and Recording Playback are not
available while in recording mode.
Start Recording:
1. From
From Snapshot
and Recording
View, select
Start Recording
2. Highlight Start Recording, and
from the
X-Press™ Menu.
Slider Bar
Stop Recording:
1. In any view, press the MENU key
2. Highlight Stop Recording and
47
the
Recording View, press the MENU
key once to open the Snapshot
and Recording X-Press™ Menu.
press the RIGHT Cursor key. A
waypoint will also be created at
the boat location, and the
recording shares the same file
name (.SON).
once to open the Snapshot and
Recording X-Press™ Menu.
press the RIGHT Cursor key.
Snapshot and
Views