Fleetwood Southwind 1999 Owner's Manual page 134

STORACjE
o
If your refrigerator is equipped with an ice maker, win-
terize it as follows:
1. Shut off the water supply valve to the ice maker.
2. Place a shallow pan under the water solenoid valve.
3. Remove the inlet fitting to the lce maker water sole-
noid valve. Drain the water from the supply line.
4. Remove the plastic nut and water line from the outlet
side of the water solenoid valve. Drain water from the
line.
5. Cycle the ice maker several times while blowing com-
pressed air through the water solenoid valve. Be sure
all water is out of the solenoid. NOTE: Up to 40 PSIG
air pressure can be used to clear the valve.
6. Reconnect and tighten the lines on the solenoid valve.
Leave the water supply turned off until temperatures
are above 32· F./O· C.
7. Dry out the ice maker mold assembly with a soft cloth.
Place the bail arm to the UP/OFF position.
SourHwill/d