Installation - Europort EPA900 User Manual

Ultra compact 900 watt 8 channel portable pa system with digital effects and fbq feedback detection
Hide thumbs Also See for EPA900:
Table of Contents

Advertisement

4
2.

Installation

The EPA900 mobile PA system consists of two loudspeakers and
a powered mixer that easily join into a portable, wheeled unit for
easy transportation. In the following sections, you will find out
how to set up and start up the PA system.
2.1
Setup Preparations
Follow the instructions to ensure straightforward and reliable
operation of the EPA900.
1.
Open the upper latch.
2.
Open the latches on the sides of the PA unit by pressing and
then lifting them.
3.
With one hand, grab hold of the recessed handle above the
latch on the side of the loudspeaker and hold the upper
handle with the other hand. Then, carefully remove the loud-
speaker sideways from the mixer.
Fig. 2.1: EPA900 setup
Be careful to prevent the loudspeaker from accidentally
falling on your foot.
4.
Repeat Step 3 for the second loudspeaker.
5.
Place the mixer in an upright position.
To assemble the PA unit for transportation, perform the
steps in the reverse order.
2.2
Setup
1.
Separate the three pieces of the PA unit as described in
Chapter 2.1.
2.
Place the mixing console and loudspeakers in the required
positions in the venue.
Use of the optional loudspeaker stands ensures a wider,
more even dispersion of sound.
3.
Using the supplied cables, connect the loudspeakers to the
rear loudspeaker outputs.
!
Caution
ONLY connect the EPA900's loudspeakers, never other equip-
ment, via the rear loudspeaker connectors. Otherwise, your
equipment could get damaged.
4.
Connect instruments, microphones, and additional
equipment via the remaining connectors on the mixer
(see Chapter 4).
5.
If you have an active subwoofer available (not included),
connect it to the SUB OUT socket.
6.
Ensure that the two volume control knobs in the MAIN
LEVEL CONTROL have been turned counterclockwise as
far as possible.
7.
Use the IEC power cord to connect the mixer's power inlet to
an AC outlet.
8.
Turn on the mixer.
9.
Make the desired settings.
!
Caution
We would like to point out that high volume levels
could damage your hearing. Always make sure that the
appropriate volume is set.
EUROPORT EPA900 User Manual

Advertisement

Table of Contents
loading

Table of Contents