Brady BMP 71 Manual page 8

Materials and Ribbons Cross Reference Chart
Material Material
Number Description
Nylon Cloth
B-499 Nylon Cloth with permanent
acrylic pressure sensitive
adhesive
Paper
B-424 General Purpose Paper with
permanent latex adhesive
Polyester
B-422 Polyester with permanent
acrylic adhesive
B-423 Polyester with permanent
acrylic adhesive
B-428 Metallised polyester with
permanent acrylic adhesive
B-430 Clear polyester with
permanent acrylic adhesive
B-459 Polyester with permanent
acrylic adhesive
B-461 Self-laminating polyester with
permanent acrylic adhesive
B-473 Polyester with static
dissipative permanent
acrylic adhesive
B-483 Polyester with permanent
rubber adhesive
B-486 Polyester with permanent
rubber adhesive
B-488 Polyester with permanent
acrylic adhesive
B-489 Polyester with permanent
rubber adhesive
B-582 BradyGlo™ Polyester with
acrylic adhesive
B-7593 EPREP: polyester tag on foam
carrier with permanent acrylic
adhesive
Polyethylene
B-109 Polyethylene tag
B-145 Polyethylene tag
B-145FR Flame retardant rigid
polyethylene tag
B-7599 Polyethylene tag
Polymide
B-426 Polymide with permanent
acrylic adhesive
B-477 Polymide with static
dissipative permanent
acrylic adhesive
B-478 Polymide with static
dissipative permanent
acrylic adhesive
These materials have
static dissipative adhesives
*R-6900 ribbon comes in red, green, magenta, yellow and blue
7
Colour Finish Min./Max. Application
Service
Temperature
White Matt -70° to 90°C Low profile through-conduit wire
30 days marking, component and general
labelling
White Matt -40° to 50°C Barcode and general labelling
30 days
White Gloss -40° C to 100°C Electronic PCB ID and component,
30 days barcode label and rating plate,
outlet and patch panel ID
White Gloss -40°C to 120°C Electronic PCB ID and component,
30 days barcode label, rating plates and
outlets
Silver Matt -40°C to 120°C Rating plates, electronic
30 days component marking
Clear Gloss -70°C to 100°C General labelling rating/name
30 days plates, outlet and general
communications
White Matt -40°C to 110°C Electronic PCB ID and component,
30 days barcode labelling and rating plates
White/ Matt -196°C to 130°C Laboratory ID
Translucent 30 days
White Gloss -40°C to 120°C Electronic PCB ID and component,
30 days barcode labelling and rating plates
White Gloss -40°C to 120°C General labelling; barcode label
30 days and rating plates
Silver Matt -40°C to 120°C General labelling; barcode label
30 days and rating plates
White Matt -40°C to 160°C Electronic PCB and component;
30 days barcode label and rating plates
White Matt -40°C to 120°C General labelling, barcode
30 days labelling and rating plates
Phosphorescent Gloss -40°C to 80°C Photoluminescent safety
identification
White, Yellow, Gloss -40°C to 100°C Electrical components, switches,
Red, Green, 30 days push buttons, rack and patch
Silver, Black panels
White Matt -40°C to 80°C Multi-purpose identification tag,
30 days where durability is required
Grey Matt -40°C to 100°C Power and ground labels
30 days
Grey Matt -40°C to 100°C Power and ground labels
30 days
White Matt -40°C to 50°C Multi-purpose identification tag
30 days
Amber Matt -70°C to 330°C Underside PCB and other high
80 sec. temperature, high performance
applications
White Gloss -70°C to 300°C Top- or bottom-side board
80 sec. application for SMT or
Through hole
White Gloss -70°C to 300°C 1 mil low profile top- or bottom-
80 sec. side board application for SMT or
Through hole
These materials are
UL recognised
Special Properties
High adhesion makes all-purpose wire
marker ideal for environments where
heat, oil and dirt are present
Good contrast and smear resistance
2 mil adhesive recommended for
application on textured surfaces
High adhesion make it ideal for highly
textured and other surfaces that are
difficult to adhere to; Translucent
Excellent abrasion and smudge
resistance
Static dissipative adhesive and liner
Ultra-aggressive adhesive for thermal
transfer printing, designed for powder
coated surfaces
Metallised polyester with ultra-aggresive
adhesive for oily, greasy and powder-
coated surfaces
High performance matt white
Ultra-aggresive adhesive for oily, greasy
and powder coated surfaces; UL/CSA
approval pending
650 µm thick material with foam tape to
replace engraved name plates; colour
match available on demand
Cross-laminated polyethylene provides
extreme tear resistance and excellent
cold-weather performance
Tear-resistant 2-sided printable tag
Tear-resistant 2-sided printable tag
250 µm polyethylene tag
Withstands extremely high
temperatures
Static dissipative adhesive and liner
Static dissipative adhesive and liner
These materials are Halogen-Free
CSA approved. (DIN VDE 0472/parts 815)
Agency Recommended
Approvals/ Ribbons
Compliance
M71-R4300
M71-R4300
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R4300
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R4300
M71-R6200
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R4300
M71-R4300
M71-R6200
M71-R6200
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R4300
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6200
M71-R4300
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)
M71-R6000
M71-R4400-WT
M71-R6900 (colours*)