Risk of overheating!
•
Never install this product in a confined space. Always leave a space of at least four
inches around the product for ventilation. Make sure that curtains or other objects
never cover the ventilation slots on the product.
Risk of contamination!
•
Do not mix batteries (old and new or carbon and alkaline, etc.).
•
Remove batteries if they are exhausted or if the remote control is not to be used
for a long time.
•
Batteries contain chemical substances, they should be disposed of properly.
Risk of swallowing batteries!
•
The product/remote control may contain a coin type battery, which can be
swallowed.
•
Keep the battery out of reach of children at all times!
Class II equipment symbol:
This symbol indicates that this product has a double insulation system.
CLASS 1
LASER PRODUCT
Care for your product
•
Do not insert any objects other than discs into the disc compartment.
•
Do not insert warped or cracked discs into the disc compartment.
•
Remove discs from the disc compartment if you are not using the product for an
extended period of time.
•
Only use microfiber cloth to clean the product.
3