Verifying Model Information; Adjusting The Horizontal And Vertical Settings; Resetting The Lamp; Verifying Service Data Changes - Sony KDF-37H1000 Service Manual

8. Change the data value of the serial number to the correct serial
number, by pressing 3 on the Remote Commander until SN7
adjustment displays. (SN7 is the second digit of the serial number
range.)
9. Repeat steps 7 and 8 for SN6 through SN1 until the correct serial
number displays.
10. To save the changes, press MUTING then 0 to write into memory.
After completing the changes, exit service mode.
11. To exit service mode, turn the power off by pressing POWER .

2-5-1. VERIFYING MODEL INFORMATION

Verify the changes to the model information by viewing the
information in the Product Support category of the user Settings
menu options.
1. Turn the TV on by pressing POWER on the Remote Commander.
2. Press HOME on the Remote Commander to display the User
Menu items.
The Media Category icons display.
Settings
Available TV
settings and
features are
listed under
the Settings
icon.
B/b
3. Press the buttons on the Remote Commander to select the
Settings option, and then press the
V/v
4. Press the button on the Remote Commander to select the
Product Support category, and then press the
Product Support
B/b
5. Press the buttons on the Remote Commander to select the
Contact Sony option, and then press the
6. Verify the changes you made in Service Mode are correct.
2-6. ADJUSTING THE HORIZONTAL AND
VERTICAL SETTINGS
1. Turn the TV on by pressing POWER on the Remote Commander.
2. Press HOME on the Remote Commander to display the User
Menu items.
The Media Category icons display.
Settings
Available TV
settings and
features are
listed under
the Settings
icon.
KDF-37H1000
button.
button.
button.
B/b
3. Press the buttons on the Remote Commander to select the
Settings option, and then press the
V/v
4. Press the button on the Remote Commander to select the
Screen Settings category, and then press the
Screen Settings
V/v
5. Press the button on the Remote Commander to select the
Screen Position category, and then press the
V/v
6. Press the button on the Remote Commander to select the
Vertical or Horizontal position, and then press the
increase or decrease the position.

2-7. RESETTING THE LAMP

Use the following to reset the lamp after replacement.
1. Turn the TV on by pressing POWER on the Remote Commander.
2. Press HOME on the Remote Commander to display the User
Menu items.
The Media Category icons display.
Settings
Available TV
settings and
features are
listed under
the Settings
icon.
B/b
3. Press the buttons on the Remote Commander to select the
Settings option, and then press the
V/v
4. Press the button on the Remote Commander to select the
General Settings category, and then press the
General Settings
V/v
5. Press the button on the Remote Commander to select the Lamp
Replacement category, and then press the
B/
6. To select Yes, press the button and then press the

2-8. VERIFYING SERVICE DATA CHANGES

1. After completing all adjustments turn the set off with the Remote
Commander and WAIT for the fans to turn off before proceeding to
the next step.
Note: It may take up to two minutes for the fans to stop.
Caution: To avoid over heating the lamp, do not unplug the set
until the fans have stopped.
2. Press the following buttons on the Remote Commander within a
second of each other:
Channel 5
DISPLAY
3. To verify the changes repeat steps 1 through 3 of 2-4. Using the
Remote Commander to View Service Data.
4. To exit service mode, turn the power off by pressing POWER .
NOTE: After exiting service mode wait 2 minutes before restarting
the set to allow the fans to shut down properly.
KDF-37H1000
button.
button.
button.
B/b
buttons to
button.
button.
button.
button.
Volume + POWER .
34