Sanyo DP26649 Service Manual page 12

5. BACK CABINET REMOVAL
Remove 14 screws to take the back cabinet off.
(C: 3x14, 10 pcs; D: 4x8, 4 pcs)
6. LCD PANEL RMOVAL
Lift up the LCD panel from front cabinet.
7. SPEAKER REMOVAL
Remove 2 screws (E: 3x14) to take off each speaker.
8. RC LED BOARD REMOVAL
Rremove 1 screw (C: 3x14) to take the RC LED board off.
9. KEY SW BOARD REMOVAL
Remove 1 screw (C: 3x14) to take the KEY SW board off.
ELECTROSTATICALLY SENSITIVE DEVICES
Many solid-state devices (especially Integrated
Circuits) are Electrostatically Sensitive, and, therefore,
require special handling techniques as described
under "Servicing Electrostatically Sensitive Devices,"
on page two in this service literature.
– 7 –
C
D
C
D
C
C
E
RC LED Board
C
C
C
D
D
C
C
C
E
C
KEY SW Board
C