Panasonic Viera TH-P42ST30Z Operating Instructions Manual page 40

Item
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
• H & V
• SOG
Reset PC Settings
Eco Navigation
H-pos
V-pos
Reset DVI
Position
Settings
Child Lock
Recording Setup
40
Setup
Adjustments / Configurations (alternatives)
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
Options change depending on signals
Sets to the minimum level if noise occurs.
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[SOG]: Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[Intelligent Auto Standby]
[Auto Standby]
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Locks a channel / AV input to prevent access to it (p. 47)
Formats the connected USB HDD / insert SD card and sets the condition
(p. 51, 53)
[On]
[On (No reminder)]
[2 hours]
Adjusts horizontal position
Adjusts vertical position